18
.............................
CCEC/ OM Manual GlasStile GSS 1.6 EN
07
.2009
Fig 5.3 - Column Mounting Plate
2.
Mark out and drill the M10 holes, using the appropriate fixing items.
3.
Place the centre column on the foundation plate and adjust the unit vertically, using the
adjusting grub s
crews on the centre column’s base plate. Lock in position using the fixing
screws.
4.
Fit the M4 x 8 Top Cladding Retaining screw into the chassis leaving approximately 2mm
clearance between the head and surface.
5.
Insert the glazed panel making sure that the plastic insulator, packing strip and the plastic
spacer sit between the glass and the metal surrounds to avoid the risk of the glass cracking.
Fig 5.4
– Glazed Panel Fitting Detail
6.
Using a spirit level adjust the glass so that the top is horizontal.
7.
Rotate the gate manually to check that it rotates freely.