GULFSIP GS24P User Manual Download

Page: 50 / 112

User Guide GULFSIP-‐GS24P

Headset Use

Physically connect your headset, refer to

Phone Installation

on page

and activate/deactivate it for

use.

Headset Activation/Deactivation

To activate the headset:

Press on the phone.

The headset icon on the idle screen

indicates that

the headset mode is activated.

Press the line key

or the

Answer

soft key to receive a call, the call will connect to your headset automatically.

To deactivate the headset:

Press again on the phone.

The headset icon disappears from the idle screen when the headset mode is deactivated.

Headset Prior

You can use headset in priority when enabling the headset prior feature. This feature is especially
useful for permanent or full-‐time headset users.

To enable Headset Prior via web user interface:

Click on

Phone

-‐>

Features

Select

Enabled

from the pull-‐down list of

Headset Prior

Click

Confirm

to accept the change.

To activate the headset mode:

Physically connect the headset.

Press to activate the headset mode.

Note

Dual Headset

You can use two headsets when enabling the dual headset feature. To use this feature, you must
physically connect headsets both to the headset jack and handset jack respectively. Once the phone

If headset prior feature is enabled, the headset mode will not be deactivated until you press the
HEADSET key again.

Summary of Contents for GS24P

















































































































Search results

Summary of Contents for GS24P

Reviews:

Related manuals for GS24P

Brands by name

Popular brands

GULFSIP GS24P, User Manual

Search results

Summary of Contents for GS24P

Reviews:

Related manuals for GS24P

Brands by name

Popular brands