GULFSIP GS24P User Manual Download

Page: 3 / 112

particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experience radio/TV technician for help.

WEEE Warning

To avoid the potential effects on the environment and human health as a result of the presence of

hazardous substances in electrical and electronic equipment, end users of electrical and electronic

equipment should understand the meaning of the crossed-‐out wheeled bin symbol. Do not dispose of WEEE

as unsorted municipal waste and have to collect such WEEE separately.

Summary of Contents for GS24P

















































































































Search results

Summary of Contents for GS24P

Reviews:

Related manuals for GS24P

Brands by name

Popular brands

GULFSIP GS24P, User Manual

Search results

Summary of Contents for GS24P

Reviews:

Related manuals for GS24P

Brands by name

Popular brands