20
© Guldmann GB/US-1706/12/2016 • # 550865_14
© Guldmann GB/US-1706/12/2016 • # 550865_14
The Combi-lock requires no manual operations.
Using the Combi-lock
When activating the Combi-lock, position the traverse rail opposite the fixed
rail, where the locking mechanism is automatically activated (the rail systems
lock together). Now it is possible to run the hoist from one rail system to the
other. When the traverse rail is moved away from the fixed rail, the locking
mechanisms are re-activated to secure the hoist and prevent it from running
off the rail. The hoist must always be run completely past the Combi-lock
before the traverse rail is moved away (the Combi-lock must be visible).
The rail systems are optimally connected at a max. distance of 1000 mm
between the hoist and the Combi-lock; you may also refer to the marking
label on the rail. At this distance, a secure and easy connection can be made.
At a distance greater than 1000 mm, it is more difficult to position the two rail
systems opposite one another. Please note that the connection works regard-
less of the position of the hoist in relation to the Combi-lock.
Safety
• In the event of an error while using the Combi-lock, discontinue its use.
Contact the Guldmann Service Team or a certified technician to perform any
necessary repairs. A defective Combi-lock can result in injury to both the user
and helper.
• The locking mechanism in the Combi-lock must not be manually activated.
• The Combi-lock is mechanically secured to prevent de-railing and crushing.
• Do not touch the Combi-lock during activation/deactivation
Cleaning
See section 4.01
Daily maintenance
Ensure that the Combi-Lock is intact. Do not use the Combi-lock if it is
damaged or defective. Instead, contact the Guldmann Service Team or a
certified technician, as per Guldmann’s instructions.
Battery
NiMH Battery 24V/2000mAh, Guldmann type number 550574.
Power supply
Power supply, Guldmann item number 554204.
