A
B
A
B
A
B
A
B
A
B
14
© Guldmann GB/US-1706/12/2016 • # 550865_14
© Guldmann GB/US-1706/12/2016 • # 550865_14
1.13
Using swing kit in doorway
1. Bring the two hoists as close together
as possible. Adjust the height of the
lifting hanger on hoist B so that the
transfer can be done without the user
touching the floor during the transfer
from one hoist to another.
2. Take the free lifting strap from hoist A
and secure it to the swing adapter on
the lifting hanger
(see 1.10 figures 5
and 6)
.
In order to lower the free lifting strap on
hoist A a slight pull must be applied to
the strap.
3. Lower the lifting hanger using hoist B
while lifting the strap on hoist A to per-
form the swing transfer. The transfer
has been completed when there is no
load on the lifting strap on hoist B.
4. Disconnect the lifting strap on hoist B
from the lifting hanger and raise the
strap on hoist B out of the way.
5. Move the lifting hanger from hoist A to
operating height and the doorway trans-
fer is complete.
Note:
There must be a load on the
lifting strap corresponding to the weight
of Guldmann’s lifting hanger before
GH1’s lowering function will operate.
