5
© Guldmann GB/US-1706/12/2016 • # 550865_14
© Guldmann GB/US-1706/12/2016 • # 550865_14
• If a defect appears during use of the hoist, stop using the hoist and contact
the Guldmann Service Team for repairs.
• The hoist is controlled by a microprocessor PCB, which can be damaged by
static electricity if touched without the necessary precautions, (
see point 1.09)
The electronics may only be serviced by Guldmann approved service techni-
cians.
• For safety reasons the side cover may only be dismantled when the emer-
gency stop is activated
(see point 2.04)
.
• The user may not hold their hands around the lifting strap during lift and
transfer.
• The lifting hanger must not be mounted or replaced when the hoist is posi-
tioned over the patient.
Re: EMC
If electromagnetic or other influences occur between this product and other
products, these products must not be used together.
1.05
Load limits on GH1 system
Read the label which indicates the maximum load limits for each component.
The component, e.g. lifting hanger, lifting sling, etc. labelled with the lowest
load limit determines the maximum load limit for the entire system.
This maximum load limit must not be exceeded.
Please note that the max load may change when different components are
used, such as lifting hangers, lifting slings, etc.
1.06
Unpacking and Preparation
Visual check of the GH1
If the GH1 is thought to be damaged upon reception, the GH1 must not be
used before it has been checked and approved by a qualified person or the
Guldmann Service Team.
1.
2.
3.
4.
5.
6.
7.
Contents of the box
GH1 hoist
Hand control
Transformer
Charging station
Side covers
Manual
Label for rail system
1
3
5
4
2
