Fig. 3a
Fig. 6
Fig. 5
Fig. 4
Fig. 3b
Fig. 2
Fig. 1
13
© Guldmann GB/US-1706/12/2016 • # 550865_14
© Guldmann GB/US-1706/12/2016 • # 550865_14
1.12
Swing kit
The swing function is used in conjunc-
tion with a transfer e.g. through a door
from one lifting module to another.
Note:
The swing adapter must be
ordered separately.
Installation of swing adapter
1. Before starting a lift involving a swing
transfer the swing adapter
(Fig. 1)
must
be installed on the lifting hanger.
(fig. 2 til 5).
2. Hold the lifting hanger in the right hand
and press the yellow button using the
thumb
(fig. 2).
3. Insert the swing adapter in the slot on
the lifting hanger top cover with the
open side facing down
(Fig. 3a, 3b)
and
release the yellow button.
4. Rotate the swing adapter to a vertical
position
(fig. 4).
Check that the yellow button has retur-
ned to its locked position by checking
that it is flush with the cover of the lifting
hanger and that the swing adapter can
rotate freely.
5. Install the strap attachment to the swing
adapter by sliding the open side of the
strap attachment over the flat area of
the swing adapter
(fig. 5).
6. Rotate the strap attachment and ensure
that it moves up on the circular portion
of the swing adapter
(fig. 6)
.
