Section 4
OM6530-C1-00
19 November, 2019
4-7
The 6530 will check the value of the resistor and select the optimum parameters for
measurement purposes. It will report the approximate setting that it is trying to use as it locates
the best settings.
The 6530 will display the measurement values as they become available. It will also display the
voltage that is being supplied to the output terminal. This example illus1 volts.
4.4.1.
Ohms Setup
If some of the current settings need to be viewed or changed, selection of the Setup sub-
menu is required.
