Section 2
OM6530-C1-00
19 November, 2019
2-6
2.4.4.
REAR PANEL CONTROLS
Rear Panel controls are shown in Figure 2-4.
Figure 2-4: 6530 Rear Panel Connectors
2.4.4.1.IEEE-488 INTERFACE
The
IEEE-488
interface consists of the standard
IEEE-488
interface connector.
The
IEEE-488
interface provides the means for a computer system to obtain
complete control of the 6530. Computer control can be implemented through the
use of the included TeraCal software package (part no. 30052-01-33), or through
IEEE-488 compliant software that utilizes the 6530 remote command set. A
Service Manual (SM6530) is available which details all of the remote commands.
A ferrite sleeve (part no. 060-13231) is provided with the Spare Parts. This sleeve
should be installed over the IEEE-488 cable to reduce electromagnetic emissions.
IEEE interface adaptors and cables can be obtained through Guildline Instruments
Limited, See Section 8.9.9 to determine which one is right for you.
2.4.4.2.RS232 INTERFACE
The
RS232
interface consists of the standard
RS232 DB9
interface connector.
The
RS232
interface provides the means for a computer system to obtain
complete control of the 6530. Computer control can be implemented through a
standard
RS232
terminal program or
RS232
based software that utilizes the 6530
remote command set. A Service Manual (SM6530) is available which details all
of the remote commands. A ferrite sleeve (part no. 060-13229) is provided with
the Spare Parts. This sleeve should be installed over the RS232 cable to reduce
electromagnetic emissions.
2.4.4.3.Ground Terminal
The ground terminal consists of a single binding post. The ground terminal is
bonded to the chassis of the model 6530 and to power ground of the line input
connector.
2.4.4.4.PRESSURE
A 5-pin DIN connector provides the input connection for the Guildline Absolute
Pressure Environmental sensor (part no. 65220).
