l
38
Network Communications Settings
The Comms Settings Menu Pane displays the configuration of communications between
the Dashboard and Sensor. This menu only changes the local dashboard record of the
Sensor IP address. Changing the Sensor's IP address (stored in the connect.ini file) is NOT
possible from the dashboard but IS possible from the SceneScan Service Interface Network
Config tab 'Sensor on-board network configuration' section (See page 59 for the
Network
Communication Settings
).
To View the Network Comms Settings:
1. Click on the Advanced button on the sidebar.
2. Click on the Comms Settings button on the Menu Pane.
To Modify the Dashboard’s Record of the Sensor’s IP
Address:
1. Navigate to Advanced > Comms Settings.
2. Click on the Edit button.
3. Modify the IP Address field as required.
4. Click on Apply to confirm.
Summary of Contents for 20-0253
Page 81: ......
