P/N G610B
April, 2016 (Rev 0)
Page 4
ENCLOSURE / EXTINGUISHER ASSEMBLY
SYSTEM ENCLOSURE
The system enclosure consists of the pressurized
extinguisher
cylinder
with
the
chemical
fire
suppressant, central processing unit control board
with plug in connections, solenoid
I
mechanical
release valve, cylinder pressure gauge, system base,
CPU enclosure and enclosure cover.
(See
FIGURE 2
)
The Guardian G600-B is intended for storage and
installation in indoor locations having ambient
temperatures between 32 deg. and 120 deg. F (0 deg
- 49 deg C).
The
Guardian
G600-B
cylinder
is
normally
pressurized to 100 psi. (689 kPa) at 70 deg. F (21.1
deg. C).
CAUTION
DO NOT ATTEMPT TO USE THE GUARDIAN G600-
B AS A HAND HELD PORTABLE EXTINGUISHER.
SERIOUS
INJURY
COULD
RESULT
FROM
MISUSE.
THE CHEMICAL AGENT USED IN THE GUARDIAN
G600-B IS NOT REGARDED AS A TOXIC
MATERIAL, BUT CAN CAUSE IRRITATION IF
BREATHED
IN
SUFFICIENTLY
HIGH
CONCENTRATIONS. AVOID CONTACT WITH SKIN
OR EYES. IN CASE OF CONTACT, FLUSH
IMMEDIATELY WITH WATER FOR 15 MINUTES. IF
IRRITATION PERSISTS, CONTACT A PHYSICIAN.
IF TAKEN INTERNALLY, DO NOT INDUCE
VOMITING.
CONTACT
A
PHYSICIAN
IMMEDIATELY.
CHEMICAL
DEPOSITS
ON
ELECTRICAL CONTACTS CAN PREVENT OR
REDUCE CONDUCTIVITY OF THE CONTACTS.
ELECTRICAL POWER MUST BE SHUT OFF PRIOR
TO
TOUCHING
ELECTRICAL
APPLIANCES
SPRAYED WITH THE CHEMICAL.
FIGURE 2
Note:
Properly connect the green/yellow
ground wire from the Main CPU board to a
grounded location of the hood using a self-
tapping screw.
MAIN CPU
HOUSING
FRONT
COVER
Permit Number:
20-04649
