63
Fig. 5.31 PTZ parameters setup
PTZ menu description
Select camera: Select one PTZ camera.
RS-485 parameters: Including baud rate, data bit, stop bit, parity, flow control,
etc. These parameters must be the same as those PTZ protocols.
PTZ address: Each PTZ has one different address.
PTZ type: DVR had the following PTZ protocols: YouLi, LinLin-1016,
LinLin-820, Pelco-p, DM DynaColor, HD600, JC-4116, Pelco-d WX, Pelco-D,
VCOM VC-2000, NetStreamer, SAE/YAAN, Samsung, Kalatel-312, CELOTEX,
TLPelco-p, TLHHX-2000, BBV, RM110, KC3360S, ACES, ALSON, INV3609HD,
Howell, Tc Pelco P, Tc Pelco D, AUTO-M, AUTO-H, ANTEN, CHANGLIN,
DeltaDome, XYM-12, ADR8060, EVI-D30, DEMO-SPEED, DM-PELCO-D, ST832,
LC-D2104, HUNTER, A01, TECHYIN, WEIHAN, LG, D-MAX, Panasonic,
KTD-348, infinova, PIH-7625, LCU, DennarDome, etc. Other PTZ protocols will be
added with the new firmware.
Note: In DVR “PTZ” menu, if you select Pelco-P protocol, when you setup
PTZ address, please plus or minus one compared with Camera ID. For example,
if camera ID is 2, the DVR PTZ address is set as ID 3.
Preset setup: Preset is using one number to represent the camera’s position,
zoom, focus and iris. Move “Active Frame” to “Setup” button on the right side of
“Preset” item, press[ENTER]key to enter preset setup menu. You can save 128 preset
numbers. Please make sure the PTZ support preset function before you setup preset.
Sequence setup: Each sequence is made up of several cruise points. Each cruise
point includes one preset number, dwell time and dwell speed. Please make sure the
PTZ you are using can support sequence function before you start to setup. You can
