57
Move “Active Frame” to “PTZ Linkage” button, press [ENTER] key to enter
“PTZ Linkage” setup menu: Shown as Fig.5.25 below
Fig. 5.25 PTZ linkage setup
First select one camera, and then select one of following PTZ linkages:
Preset: Set the flag as “
” to enable preset, in the preset number edit box and
input one preset number that has been setup already. Please refer to chapter
5.15 for preset setup.
Sequence: Set the flag as “
” to enable sequence and input one sequence
number that has been setup already. Please refer to chapter 5.15 for sequence
setup.
Cruise: Set the flag as “
” to enable cruise. Please refer to chapter 5.15 for
cruise setup.
Press “Confirm” button to save and return “Alarms” menu. Press “Cancel” button
or [ESC] key to abort and return “Alarms” menu.
Note: Please make sure that the PTZ you are using can support preset,
sequence and cruise functions. One external alarm input can trigger many
cameras PTZ linkage.
Step 9: Copy the parameters to other external alarm input, you can copy the
parameters of current alarm input to other external input.
Step 10: Save setup In “Alarms” menu, press “Confirm” button to save the
parameters. Press “Cancel” button or [ESC] key to abort.
Alarm relay output setup
Step 1: In “Alarms” menu, use [
↑
] [
↓
] keys to select one alarm output.
Step 2: Select delay time
The delay time is when the alarm is disappeared; the alarm output will continue
output time. The delay time options are: 5 Seconds, 10 Seconds, 30 Seconds, 1
