17
Closed Position Stop Plate
Gate In Closed Position
CL
Use mounting
holes and screws
provided to mount
control box to a
secure surface.
RECEIVER
25
FUSE
BATT+
BATT-
1
2
3
4
O
N
D
IP
RECEIVER
LEARN
MAST LIMIT
LEARN
SLV LIMIT
S3
S4
ALM
S2
MASTER INPUTS
SOLAR
or
18 VAC
SLAVE INPUTS
LOCK
GTO
AUX
GTO
LOCK
PWR
AUX
RLY
POWER
INPUTS
CONTROL
OUTPUTS
MASTER CABLE
SLAVE CABLE
CONTROL INPUTS
AUTO CLOSE TIME
STALL FORCE
At this stage of the installation, the operator should be installed on
the gate and the closed position stop should be in place.
Check List
• The gate is plumb, level, and swings smoothly on its hinges.
• A plate or support was added for the gate bracket (if necessary).
• The operator is level and mounted on the centerline of the gate.
Mounting the Control Box
Step 1
Mount the control box using the screws (
provided
) or another
secure mounting method. The control box must be mounted at
least
3 feet above the ground
to protect it from rain splash, snow,
etc., and at least
3 feet from an AC power source to prevent
electrical interference
.
