16
Step 10
Attach the operator to the securely bolted post bracket assembly and gate bracket using clevis pins, bushings, and hairpin
clips, or optional Pin Locks (see
Accessory Catalog
). Verify that the operator is level and adjust the post bracket assembly if
necessary.
Installation of the Closed Position Stop
The GTO/PRO® 4000XL Gate Operator firmly holds the gate in the closed position using the positive stop plate.
The positive stop helps stabilize the gate leaf in the closed position. To further enhance the stability and security
of your gate, install the optional
GTO/PRO® Automatic Gate Lock
FM144
(
see
Accessory Catalog
).
Step 11
Remove hairpin, clevis pin, and washer from front mount
and close the gate (remember to support operator). Fasten the
closed position stop plate
to the end of the gate frame on the
gate centerline (in line with the operator arm)
, but
do not
tighten it completely. Slide the stop plate toward the fence
post until they touch (
see illustration
). Once you have moved
the stop plate to the correct position, tighten its hardware
completely.
Use the appropriate hardware for your type of gate (use
U-bolts if you have a tube or chain link gate; wood or lag
screws for wood gates; etc.). This hardware is not provided.
1Z]aSR>]aWbW]\
Ab]^>ZObS
1Z]aSR>]aWbW]\Ab]^>ZObS[]c\bSR
]\[SbOZ^]abeWbVCP]Zba
5ObS6W\US
BVSUObS[cab]^S\
[Of
4S\QS>]ab
5ObS>]ab
B=>D73E
A723D73E
Level Operator
Fence Post
Clevis Pin, Bushing, and Hairpin Clip
Gate In Open Position
Mounting the Operator