5.1 Prepare for use........................................................................................................................... 23
5.2 Fill the fuel tank...........................................................................................................................23
5.3 Change the output...................................................................................................................... 24
Change to the high output..................................................................................................... 24
Change to the low output.......................................................................................................24
5.4 Start the machine........................................................................................................................24
5.5 Use the machine.........................................................................................................................25
5.6 Stop the machine........................................................................................................................25
5.7 Transport the machine................................................................................................................25
5.8 Use the panic bar in case of an emergency............................................................................... 26
5.9 Release the panic bar.................................................................................................................26
6 Preventive maintenance......................................................................... 27
6.1 Preventive maintenance schedule..............................................................................................27
6.2 Do a functional test of the panic bar........................................................................................... 27
6.3 Do a detection test of the output.................................................................................................27
6.4 Do a detection test of the input................................................................................................... 28
6.5 Clean the machine......................................................................................................................29
6.6 Do a check of the tension of the belts.........................................................................................29
6.7 Replace the air filter....................................................................................................................30
6.8 Fill the engine with oil................................................................................................................. 31
6.9 Lubricate the bearing housing.................................................................................................... 31
6.10 Replace the belts........................................................................................................................ 32
6.10.1 Remove the cover...........................................................................................................32
6.10.2 Remove the belts............................................................................................................ 32
6.10.3 Install the belts................................................................................................................ 33
6.10.4 Adjust the tension........................................................................................................... 33
6.10.5 Do a check for correct operation.....................................................................................34
7 Corrective maintenance.......................................................................... 36
7.1.1 Lock the rotor.................................................................................................................. 36
7.1.2 Remove the blades......................................................................................................... 36
7.1.3 Turn the blades............................................................................................................... 37
7.1.4 Sharpen the blades.........................................................................................................37
7.1.5 Install the blades............................................................................................................. 38
7.1.6 Adjust the gap................................................................................................................. 38
7.1.7 Finish.............................................................................................................................. 39
7.2 Do maintenance on the engine...................................................................................................39
7.3 Remove a blockage.................................................................................................................... 39
Contents
4
D09-CC13S20-11
