GTM Professional GTS1300C, User Manual

Page: 27 / 52

6 Preventive maintenance
Warning:
Before you do maintenance, make sure that:
•
The spark plug cap is disconnected.
• The engine is cool.
• The work area has sufficient light.
6.1 Preventive maintenance schedule
Task Frequency Procedure
Do a functional test of the
panic bar
Before every use Refer to section 6.2
Do a detection test of the
output
Before every use Refer to section
6.3
Clean the machine After every use Refer to section
6.5
Do a check of the tension of
the belts
Every week Refer to section
6.6
Clean or replace the air filter Every month Refer to section 6.7
Replace the engine oil First time after 20 hours,
thereafter every 100 hours
or 6 months.
Refer to section
6.8
Lubricate the bearing hous-
ing
Every year Refer to section
6.9
Replace the belts Every two years Refer to section
6.10
6.2 Do a functional test of the panic bar
Procedure
1. Start the machine. Refer to section
5.4
.
2. Do not put any material in the input.
3. Push the panic bar down.
a. The test is successful if the machine stops.
b. If the machine does not stop, there can be a problem with the detection of the
input. Speak to your dealer.
4. Release the panic bar. Refer to section
5.8
.
6.3 Do a detection test of the output
Note:
This procedure is valid for both the low and the high output.
Preventive maintenance
D09-CC13S20-11 27