7.3.3
Remove the input
Note:
Two persons are required to remove the input. The input is heavy.
Preliminary requirements
•
Wrench size 13
Procedure
1. Remove the bolts (A) and the
washers (B).
2. Tilt the input (C).
3. Remove the hinges (D) from the holes
(E).
4. Remove the input.
7.3.4
Remove the blockage
Procedure
1. Remove all material from inside the input and the output.
2. Remove all material on top of the rotor.
3. Use the rotor deblocking tool to remove wood chips from the rotor. Refer to section
.
B
A
C
D
E
Corrective maintenance
D09-CC13S20-11
41
