Gtec NS3000 Series, User Manual

Page: 34 / 69

28 NS3000 UPS 60KVA~120KVA User Manual
touch screen. The functions description is shown in Table 4.3.
Table 4-2
Functions of Control and operation keys
Function Key Description
EPO
Long press
，
cut off the load power (shut down the rectifier,
inverter, static bypass and battery)
BYP
Long press
，
transfer to the bypass (Push the button up in the
back of the door to enable , see Figure4.2)
INV Long press, transfer to the inverter
MUTE Long press to switch between turning off and on the buzzing
Attention
When bypass frequency is over track, there is interruption time(less than 10ms) for
transferring from bypass to inverter.
4.2.3 LCD touch Screen
Users can easily browse the information, operate the UPS, and set the parameters through
the LCD touch screen, which is friendly for users.
After the monitoring system starts self-test, the system enters the home page, following
the welcome window. The home page is shown in Figure4-2.
HT33200 N=01 (S)
11:03
Battery Not Connected-Set
…………………………
1 0
2 0
3 0
Status bar
……………………
……………………
……………………
…………………………
Information
Display
Warning
information
Main menu
Figure 4-2
Home page
Home page consists of Status bar, Information display, warning information and main menu.
 Status bar
The Status bar contains the model of the product, capacity, operational mode , and the
number of the power module and the time of the system.

Warning Information
Display the warning information of the cabinet.
 Information Display
Users can check the information of the cabinet in this area.