GST-IFP4M Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page
60
sub-nets are listed in line as shown in Fig 4.32.
For the first line: Main (Local: 5) 17-250-10-17 Qty:003/009
Main (Local: 5): Main net, Local: 5 is the address of current panel.
17-250-10-17: No.17, No.250, No.10 panel are connected hand in hand and in a
circle.
Qty:003/009: main-net has 3 panels and the whole network has 9 panels.
For the second line: Gate:17 17-3-2-17 Qty:003/009
Gate 17: Gateway panel, the panel address is 17.
17-3-2-17: No.17, No.3, No.2 panel are connected hand in hand and in a circle.
Qty:003/009: Gate 17 has 3 panels and the whole net has 9 panels.
Clicking the BAUD button to set the baud rate of the whole net.
Clicking the Register button and wait 3 minutes to update the network topology of the
whole system.
4.1.3 Advanced Setting
Clicking
Advanced Setting
in
Panel Setup
menu enters the screen for senior setting.
Network Setup: clicking
Network Setup
in
Advanced Setting
menu pops up the
screen for setting the network on the right. Users can set up based on actual situation.
Refer to the figure below Fig 4.33.
Fig 4.33
Panel No.
: input the number of the FACP here.
Modify Address:
Users can modify a device address in a loop by clicking
Modify
Address
in
Advanced Setting
menu as shown in Fig4.34. Please modify the device
address based on the actual situation, pay attention not to make the new device
address repeated with others.
Summary of Contents for GST-IFP4M
Page 1: ......
