GST-IFP4M Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page
7
The electrical limitations of the system power supply.
The capacity of the secondary power source (standby batteries).
1.3 Basic Components
A basic FACP requires at least the following components:
A PSU-250 Main Power Supply
Supply power to the whole panel and connected devices. Monitor the status of AC
power, battery and charger, switch power between AC power and battery.
A Battery
The FACP uses only sealed lead-acid batteries for standby power. Maximum battery
capacity is 66 AH (ampere-hour). Minimum battery capacity depends upon your
system configuration; absolute minimum is 12 AH.
A Display and Keypad Module
This module includes LCD, Touch screen, display driver board, LED, Keypad board.
It provides information in graphic and word, and customers can operate the panel
using real keys and touch screen.
A Main Box Module
This module is the heart of the FACP. It includes a mother board, a CPU card, a NAC
card and a Loop card.
An Enclosure with door
The enclosure can conclude a power supply, a host cabinet, two batteries of
12V/38Ah. A display and keypad module and 8 ZCPs can be installed on the door.
1.4 Optional Components
1.4.1 LC-401 Single Loop Card
Single Loop Card has one completely Class A SLC compatible with Digital Protocol Bus.
The loop can connect maximum 242 devices. Users can add up this card to extend loop if
necessary.
1.4.2 LC-402 Dual Loop Card
Dual Loop Card has two completely Class A SLCs compatible with Digital Protocol Bus.
Each loop can connect maximum 242 devices. Users can add up this card to extend loop
if necessary.
1.4.3 P-9966A CAN Class A Network Card
The network card is essential accessory for the FACP to be networked by inserting the
card into the slot of the panel’s motherboard. Many separate FACPs can form a fire
alarm network through the card. Each panel supports Max three network cards working
simultaneously and these 3 cards can be combination of P-9966A and P-9983. Please
refer to Section2.5.7 for wiring and setting information.
Summary of Contents for GST-IFP4M
Page 1: ......
