7
INSTALLATION
Vacuum Option for the Basic Aspirator
The Vacuum Hose Option provides
and additional cleaning function.
This option allows quick clean-up of
the dryer location and the inside of
the dryer plenum. An air cutoff slide
plate is included with this option. The
air cutoff plate removes the settling
chamber from the system providing
maximum vacuum to the vacuum
hose.
It is not recommended that
objects such as rocks be vacuumed
into the system as damage to the
fan will occur.
Vacuum Hose Option
Bolt the Vacuum Hose Adapter
Weldment to the Settling Box
Fan Side.
Place the
Slide Valve Spacers (2)
onto the
Settling Box Fan Side
with holes aligned.
Place the
Slide Plate
onto the box side between the spacers with the
angle away from the 6" hole.
Align the slide plate end of
Vacuum Hose Adapter Weldment
with
Settling Box Fan Side
so the 2" tube points down.
Bolt the
Vacuum Hose Adapter Weldment
to the
Settling Box Fan
Side
using the
5/16" Whiz Nuts and Bolts
provided.
Check slide plate movement. The plate should fit snugly as not to move
when it is in the closed position.
Drill the dimples on the
Settling Box Fan Side.
Set the
Settling Box Fan Side
so the 6" hole side is up.
Drill the dimples located around the 6" hole using a 3/8" drill bit.
NOTE:
This step should be completed before the
Aspirator Settling Box is assembled.
Attach the
Vacuum Hose
to the 2" tube on the bottom of the
Vacuum
Hose Adapter Weldment.
Work the hose in a back and forth twisting motion to work 1.00" of the
hose onto the tube.
Attach the Vacuum Hose to the
Vacuum Hose Adapter
Weldment.
Vacuum Option Installed for the Basic Aspirator.