9
INSTALLATION
Settling Chamber installed with
"fresh air" vent open.
Settling Chamber Assembly
The Settling Chamber Assembly
reduces the suction force being
generated at the discharge box to
prevent any kernels from being
pulled into the system. A "fresh air"
vent is provided to also control the
suction force. The Settling Chamber
Assembly can be modified with the
Vacuum Hose Kit. This kit provides
a hose and adapter for cleanup
around the dryer. It can also be used
to vacuum the inside of the dryer
plenum. This kit is purchased
separately from the main Aspirator
unit.
Attach the Settling Box Fan
Side to the Discharge Bypass
Chute.
Position the
Settling Box Fan Side
around the outside of the
Discharge Bypass Chute.
Secure the
Settling Box Fan Side
with the
5/16" Self Tapping
Screws (13)
provided.
Bolt the Inlet Duct Weldment
onto the Settling Box Fan
Side.
Bolt the angle ring end of the
Inlet Duct Weldment
to the
Settling
Box Fan Side
with the
5/16" Whiz Nuts and Bolts
provided.
Attach Grille Vent & Gasket to
the Settling Box Top Side.
Position the
Grille Vent & Gasket
onto the
Settling Box Top Side
.
Secure the
Grille Vent
with the
#6 Phillips Head Screws (4)
provided.
Check movement of
Grille Vent
mechanism so that it opens freely.
Attach the Settling Box Top
Side to the Settling Box Fan
Side.
Position the
Settling Box Top Side
around the outside of the
Settling
Box Fan Side.
PGC Settling Box Fan Side.
Check that the angle at the bottom of the top side is under the discharge
box lid.
Secure the
Settling Box Top Side
with the
5/16" Self Tapping
Screws (24)
provided.
The inlet duct connects to the
settling chamber with an angle ring.