62
24' Batch & Autoflow
High Limit Rotary
Switch
TAF-6103
Low Limit Rotary Switch
TAF-6100
4
6
2
3
1
1
2
3
4
5
7
8
9
10
Figure #58
ASSEMBLY OF HIGH/LOW LIMIT ROTARY SWITCHES
Attach flex-coupling to the power-pak. Apply teflon tape or pipe sealant (not included) to power-
pak pipe threads and thread power-pak into mounting plate coupling. Conduit opening in power-
pak should be at right angles to roof rib or face toward eave. Caulk underside of mounting plate
above and both sides of 2" hole. Bolt to roof panel. Attach shaft extension according to diagram at
left. Use teflon tape or pipe sealant (not included) on shaft guard and thread to underside of
mount plate coupling. Add 1/4" drilled coupling and paddle. (Note: single vane paddle is used on
Low
level switch. Also, be sure to use roll pins when instructed. If cotter pins are used, bend
back fully to educe shaft guard interference to rotation.)
Key
Part No.
Description
Quantity
Weight
1
TD-100076
Rotary Switch Power-Pak
1
3.50
2
TD-100629
Roof Mount Coupling Weldment
1
2.14
3
TD-100075
Flex-Coupling
1
0.50
4
S-7241
1/8" x 1.1/4" Cotter Pin
2
0.02
5
TAF-6085
1-Vane Paddle
1
0.75
6
TAF-6086
3-Vane Paddle
1
0.75
7
TAF-6091
8" Shaft Guard
1
0.81
8
TAF-6092
5" Shaft Extension
1
0.20
9
TAF-6094
34" Shaft Extension
1
1.52
10
TAF-6093
34" Shaft Guard
1
2.04
*
TAF-6096
Hardware Package
1
0.98
--
PNEG-300
Rotary Switch Instructions
1
0.04
--
S-275
5/16" - 18 x 3/4" Bin Bolt
6
0.16
--
S-3651
Tube Seal
1
0.74
--
S-396
5/16" - 18 Hex Nut
6
0.06
--
S-7241
1/8" x 1.1/4" Cotter Pin
2
0.02
ROTARY SWITCHES
