5. Troubleshooting
PNEG-1813
Electronic Distributor Control
51
Remedy:
Select a different position.
Message:
You cannot select a locked-out position. Please select a different position.
Reason:
This error displays when trying to choose a spout position that is locked out.
Remedy:
Select a different position.
Message:
The spout has drifted out of position. Please verify current position of the spout.
Reason:
This error occurs when spout position reading changes without a move command being issued.
Remedy:
Check mechanical components for looseness, wear, or damage. Repair or replace as necessary.
Summary of Contents for PNEG-1813
