3. Operation Procedures
PNEG-1813
Electronic Distributor Control
37
Configuration Setup Screen
This screen allows the user to change the distributor’s spout diameter property, total of number of spouts,
and for resetting the distributor back to the default settings.
Figure 3I
Configuration Setup Screen
Diameter of Spouts:
Press the button that matches the size of the spout that is currently
installed on the distributor. The diameter that is selected will turn green and the number of
spouts available for that diameter will be displayed.
Number of Spouts:
Press the button that matches the current configuration of your
distributor. The number that is selected will turn green. The number of spout options will
change according to the diameter of spout selected.
Reload Defaults:
If during operation, any configuration parameters are altered from the
original settings, pressing this button will revert settings to the default values.
OK:
Press this button to save your current configuration and be brought back to the Setup
Menu.
NOTE:
A warning message will appear if distributor has already been previously configured.
Figure 3J
Summary of Contents for PNEG-1813
