GSA Bolide BN-NVR/NX User Manual Download Page 99

Page: 99 / 101

USER MANUAL

5.6.4.3 Upgrade

1. Copy the firmware file (.sw file) to your USB drive, and insert the USB flash drive into the

NVR’s USB port.

2. Click Select File to choose the firmware file in your USB flash drive, then Click

3. Click

Upgrade

to start system upgrade. The system upgrade will last around 5-10

minutes, please do

NOT

power off the NVR or remove the USB from NVR during firmware

upgrade.

5.6.4.4 Parameter Management

You can export the main menu settings you have configured to a USB flash drive, or import an
exported setting file from a USB flash drive to the NVR.

Save Settings

: Click to save the NVR’s current system settings to the USB device. You will be

required to input the Admin password to authenticate.

Load Settings

: Once you have created a system settings export, you can import the settings on

another NVR. Click

Load Settings

navigate to the system settings file you want to import

from your USB flash driver.

You will be required to input the Admin password to authenticate.

Summary of Contents for Bolide BN-NVR/NX






































































































Search results

Summary of Contents for Bolide BN-NVR/NX

Reviews:

Related manuals for Bolide BN-NVR/NX

Brands by name

Popular brands

GSA Bolide BN-NVR/NX, User Manual

Search results

Summary of Contents for Bolide BN-NVR/NX

Reviews:

Related manuals for Bolide BN-NVR/NX

Brands by name

Popular brands