USER MANUAL
28
5.1.4
PTZ
This menu allows you to configure the PTZ (Pan-Tilt-Zoom) settings for the dome camera
Channel
:
Channel name
Signal Type:
Analog & Digital for IP channels.
Protocol
:
Choose the communication protocol between the PTZ capable camera and the NVR.
If your camera supports the UTC (Up the Coax) function, you can choose COAX1 or COAX2 to
display the camera’s OSD menu or control the UTC PTZ function.
Baudrate
:
The speed at which information is sent from the NVR to the PTZ-capable camera.
Make sure it matches the compatibility level of your PTZ-capable camera.
DataBit / StopBit
:
The information between the NVR and PTZ-capable camera is sent in
individual packages. The
DataBit
indicates the number of bits sent, while the
EndBit
indicates the
end of the package and the beginning of the next (information) package. The available parameters
for
DataBit
are:
8
,
7
,
6
,
5
. the available parameters for the
StopBit
are
1
or
2
.
Parity
: Checks for errors. See the documentation of your PTZ-capable camera, to configure
this setting.
Cruise
: Enable to use Cruise mode. In order to use Cruise mode, you need to set a
number of preset points.
Address
: Set the command address of the PTZ system. Please be noted that each PTZ-capable
camera needs a unique address to function properly
