USER MANUAL
39
5.1.9.1 PID (Perimeter Intrusion Detection)
The Perimeter Intrusion Detection function detects people, vehicle or other objects that enter
and loiter in a pre-defined virtual region, and certain actions can be taken when the alarm is
triggered; Click
to enter the
parameter settings
of PID:
Channel
:
Select the channel you want to configure
Switch:
Enable or disable the PID function
Buzzer
: Disable or enable the DVR’s buzzer. It can emit an alarm tone for 10, 20, 40 or 60 seconds
when the detection is triggered
Alarm Out
:
If your NVR supports a connection to an external alarm device, you can set it to emit
an alarm tone.
Latch Time
:
Configure the external alarm’s duration when the detection is triggered.
Record Channel:
Select the channel(s) you want to record when a detection is triggered.
Post Recording
:
You can set how long the NVR will continue to record after an event has occurred.
Show Message:
A letter “S” will be displayed on the screen when the PID function is triggered.
Send Email:
If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen:
When the detection is triggered, the channel will be enlarged to full screen.
FTP Picture Upload:
If an alarm is triggered, a Picture will be sent to your preset FTP account.
FTP Video Upload:
If an alarm is triggered, a Video will be sent to your preset FTP account.
Picture to Cloud:
If an alarm is triggered, a Picture will be sent to your preset Cloud account.
Video to Cloud:
If an alarm is triggered, a Video will be sent to your preset Cloud account.
