GSA Bolide BN-NVR/NX User Manual Download Page 93

Page: 93 / 101

USER MANUAL

Scale:

To adjust the size of the displayed screen by scale.

X Offset:

To move the displayed screen to the left or right.

Y Offset:

To move the displayed screen up or down.

Click once or click and hold on the arrow to adjust the size and position, or you can scroll the
wheel of the mouse to adjust. Right-click to exit, and click

Apply

to save your modifications.

Cursor Hidden Delay

: Click the drop-down menu to select the time your NVR will take to hide the

mouse cursor when idle. You can also disable this by selecting “OFF” (password protection will be
temporarily disabled).

Cursor Acceleration

: To adjust the speed of the mouse cursor.

Transparency

: Move the slider left or right to change how transparent the Menu Bar and Main

Menu will appear on-screen. Adjust accordingly.

Summary of Contents for Bolide BN-NVR/NX






































































































Search results

Summary of Contents for Bolide BN-NVR/NX

Reviews:

Related manuals for Bolide BN-NVR/NX

Brands by name

Popular brands

GSA Bolide BN-NVR/NX, User Manual

Search results

Summary of Contents for Bolide BN-NVR/NX

Reviews:

Related manuals for Bolide BN-NVR/NX

Brands by name

Popular brands