USER MANUAL
32
Click
Alarm
to configure the motion detection alarm function:
Channel
:
Channel name
Buzzer
:
The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer’s
duration in seconds when motion is detected.
Alarm Out
: Optional function. If your NVR supports a connection to an external alarm device,
you can set the channel emit an alarm.
Latch Time
: Set the external alarm’s duration when motion is detected.
Record
: Click
icon and choose which channel(s) you want to record when the motion
detection is triggered.
Post Recording
: You can set how long the NVR will continue to record after an event has
occurred. The recommended recording length is 30 seconds but it can be set up to 5 minutes.
Show Message
: Check the box to display
icon on the live view screen when motion is
detected.
Send Email
: You can set the NVR to send an auto-email when motion is detected.
Full Screen
: If this function is enabled and motion is detected in a channel, you will see that
channel in full screen.
FTP Upload
: To upload alarm images to an FTP server when motion is detected. To enable
