11
Handle considerations
5 Mounting
Instruction book, IQAN- LC5-X05
Handle configuration to fit -U2 bellow
The IQAN-LC5-X05 is offered without a handle, either no bellow (-U1) is supplied, or
a standard bellow with Ø40mm opening is supplied (-U2). A handle of customer design
or from a 3rd party handle manufacturer may use this standard boot if the mounting
bushing is properly designed.
The LC5 handle mount consists of a Ø10mm stem and M12 thread, for dimensions, see
section Dimensioning of the IQAN-LC5-X05, on page 24. To fit the -U2 bellow, a disc
with a groove to hold the top of the bellow needs to be an integral part of the handle
mount.
Disc dimension guidelines for -U2 bellow interface.
Depending on the mount design, the disc may be plastic if desired, however, the
threaded part of the handle mount that is tightened to the LC5 stem should be metal for
strength.
N
OTICE
The design shown above is a guideline only!
The customer is responsible for developing a suitable handle interface when mounting
a non-Parker handle to an IQAN-LC5-X05-U2 joystick base.
min Ø 18.0 (2x)
Ø 45±0.3
Ø 55±0.5
THREAD
LENGTH
min 15
Ø 10.1
M12x1.25
+0.2
-0.0
SECTION A-A
A
A
1±0.2
2±0.2
2.5±0.2
6±0.3
CUSTOMER DESIGN
R 1±0.3
