Smart SVC Relay Instruction Manual
43
Selc Comp Mode
It states parallel working relay to be master or slave. The phase is entered to alarm input of
slave relay in relay operating mode. The alarm output is connected to master generator input.
Moreover, the neutral connection of generator input of master relay is done. The phase is
connected to alarm input of master relay. The alarm output of master relay is connected to the
generator input of slave relay. The neutral connection of the generator input of master relay is
done.
Figure 3.106
Ade Reset On
It is used to protect energy measurement units in harmonic places from incorrect
measurement.
Figure 3.107
Back Light
It exists in 18-stage relays. If you want the screen to never go off, you must make this feature
‘on’.
Figure 3.108
Default Values
All the parameters restored factory settings. except important ones such as Transformer ratio,
DYN value.
Figure 3.109
4. CAPACITOR TRANSFORMATION TABLE
Default Values
Yes ->No
Back Light
Off
Selc Comp Mode
Master
Ade Reset On
Off
Summary of Contents for SMART GES1
