GRUP ARGE SMART GES1, Instruction Manual

Page: 21 / 44

Smart SVC Relay Instruction Manual
21
Figure 3.13
3.1.12 Capacitive Energy
If desired, the Capacitive Energy that occurred in the system is displayed on the operating
screen of SMART SVC RELAY like in
Figure 3.14.
Figure 3.14
3.2 Main Menu and Sub-Menus of Smart SVC Relay
To enter the menu when the device in on operating mode, press SET key for 3 sec. To stroll
in main menu, SET key is used. After reaching to the desired menu option, the selection can be
made with UP / DOWN keys. The selection is confirmed by pressing SET key again or reaches
to sub-menus if they exist. If desired, ESC key is used for existing from menu. If user stays in
the menu longer than 1.5 minutes, device exists from the menu automatically and returns to
operating mode.
3.2.1 Stage Powers
It is the first menu option that is entered by pressing SET key in operating mode. A message
like below (Figure 3.15 ) is encountered. It is stated that the values of stage powers per phase
are displayed separately.
Figure 3.15
Figure 3.16
In this menu, the type and states of the stages connected to the device can be seen. When the
message above is displayed on the screen, you can switch between the stages with
UP/DOWN
keys. In SVC featured relays, information about reactors is given in the last 3 stages. The value
of the reactors connected to stage is stated as –.
Capacitive Energy
000000000213 V.h
Stage Powers
L1 L2 L3
K#1 Single Phase
kVAr
0.0 2.0 0.0