GRUP ARGE SMART GES1, Instruction Manual

Page: 6 / 44

Smart SVC Relay Instruction Manual
6
1. INTRODUCTION
1.1 Front Panel View
1) LCD Screen: All powers, ratios, values, warnings and menu parameters are monitored on the screen.
Screen lighting gets off automatically if no key is pressed for 2.5 minutes in operating mode. In this case
it is sufficient for user to press a key to light the screen again.
2) Program (SET) Key: The key to enter the menu, switch to a submenu and keep the settings.
3) Exit (ESC) Key: It enables to return to the previous process in the menu and exit from the menu.
4) Up Key: It enables to move upward in measurement and menu position.
5) Down Key:
It enables to move downward in measurement and menu position.
6) Stage LEDs: 12 pieces. (18 pieces in 18-stage relays. 22 pieces in 22-stage relays.) The stages are
stated on each LED. When the LED is on, it is understood the relevant LED is activated.
7) Energy (Power) LED: The LED indicating as PWR on Leksan. When there is energy in the device,
this green coloured LED gets on. If it does not get on, there is a problem in the supply.