39
Sheet 72.04
Parts F24-
F31
●
Thread the ribs F24 to F31 to the spar F21
●
Fasten the end bar F33 to the plan
●
Ajust the ribs to the end bar and glue the at right angle to the spar
40
Sheet 72.05
Parts R23-
R27
●
Dry fit and slide ribs F24 to F31 onto carbon fiber spar F21.
●
Insert servo frame F10 between the ribs F26 and F27.
●
Pin the trailing edge F33 over the plan.
WARNING:
Ensure that F33 is correctly
orientated. The identification “F33” on the part should be visible, closest to the central
wing panel, on the rear face of the trailing edge. The ribs will then correctly match the
angled slots in the upper face of F33.
●
Align and glue all ribs to the trailing edge strip (thick CA).
●
Align all ribs at right angles and glue to the spar (thin CA).
●
Glue the servo frame F10 between ribs F26 and F27 (thin CA).
Summary of Contents for F5J
Page 38: ......