27
Sheet 72.13
Part R55
●
Screw the motor to the motor bulkhead R55.
●
Wrap the motor in several layers of paper so that it fits snugly into the nosepiece. This
will ensure that the motor is centered and that the motor will turn freely after gluing the
bulkhead.
●
Insert the motor and wires into the nose block with the motor bulkhead F55 attached.
●
Using a small amount of glue, tack the motor bulkhead R55 to the motor nose block
and leave to dry (thin CA).
●
Remove the motor, discard the paper, and glue R55 securely to R52 (thin CA).
28
●
Sand the fuselage to round edges, etc., according to crosssection on the plan.
Summary of Contents for F5J
Page 38: ......