71
DEUTSC
H
DEUTSC
H
DEUTSC
H
DEUTSC
H
ENGLI
SH
Setting the DigtaScan barcode reader
•
The DigtaScan must be plugged in and latched into the
portable dictation machine (see also chapter "Plugging
in, unplugging").
– Only when the DigtaScan is plugged in the associated
menu items on the dictation machine are available.
•
Switch on the portable dictation machine.
•
Move the slide switch to »
«.
•
Press the »
MENU
« button.
•
Use the Up/Down button »▲« or »▼« to select the
»
Barcode reader
« menu item and then press the »
OK
«
button.
•
Use the Up/Down button »▲« or »▼« to select »
Pro-
gramming
«.
– The »
Programming barcode reader
« menu function
appears in the display.
Note:
»
RESET
«, see also chapter „Restoring the default settings”.
•
Scan the desired programming code with the »
SCAN
«
button.
– The machine acknowledges the successful reading of
the code with a single signal tone, and the laser beam
shuts off.
– You can scan any number of programming codes
consecutively with the »
SCAN
« button.
Note:
If the machine cannot read a code, it emits a double
signal and displays the message »No barcode found«.
Confirm the error message with »
OK
«.
•
Once you have made all the settings, press the »
END
«
button to quit the menu.
DIGTASCAN 404 BARCODE READER
_______
Programming
Barcode reader
SCAN RESET
END
No Barcode
found
OK
Delete
►
Barcode readerr
Dictation status
▼▲
OK
ESC
Delete
On/Off
►
Programming
▼▲
OK
ESC
STOP
