75
ENGLI
SH
RFID READER DIGTARFID 414
_______________
Scanning a RFID code for a new dictation
The RFID reader is connected to the portable dictation
machine and activated.
•
Switch on the portable dictation machine.
•
Move the slide switch to »
«.
•
Press the »
REC
« button and then the »
NEW
« button.
– »
SCAN
« and »
ESC
« appears in the display.
•
If you don't want to read a RFID-Code into the dictation
accompanying note, press the »
ESC
« button and con-
tinue with your dictation as usual.
•
If you wish to read a RFID code, hold the RFID Reader
directly at the label with the RFID code (see illustration)
and press the»
SCAN
« button.
– The device will now read the RFID code. If the RFID
code was successfully read in, the device will acknowl-
edge this by emitting a single tone.
– The RFID code appears in the display.
•
If you want to include the RFID code as displayed in the
dictation, press the »
OK
« button.
•
If you want to re-read the RFID code press the »
SCAN
«
button.
•
If you don't want to include the RFID code in the dic-
tation, press the »
ESC
« button and continue with your
dictation as usual.
Note:
If the device cannot read the RFID code, it emits a double
signal tone, and the message »
No RFID found
« appears
on the display. Confirm the error message with »
OK
«. You
can now repeat the scan with the »
SCAN
« button or cancel
it with the »
ESC
« button and dictate without RFID code.
SCAN
ESC
0350144007000
80398
SCAN OK
ESC
No RFID-Code
found
OK
STOP
