16 / EN
Washing Machine / User Manual
Filling Liquid Detergent and Softener
•
Open the detergent compartment by pulling it towards yourself.
•
To fill liquid detergent (left) and softener (right), open the related
tank’s lid by pulling it upwards as shown in the picture.
MAX
•
Remember not to exceed the “Max” sign when adding liquid
detergent or softener.
•
Close the lid of the compartment.
•
Close the detergent drawer by pushing lightly.
•
After closing the detergent drawer, the flashing dosage symbol ( )
starts lighting up continuously.
•
It indicates that the compartments are filled successfully and the
detergent drawer is in its place.
•
We recommend filling the detergent compartment with liquid detergents that can be used in common
for coloured and white laundry.
•
If the detergent symbol is flashing even though the detergent compartments are filled, the detergent
drawer is not seated properly. Push the drawer so that it is fully seated.
WARNING
While the detergent drawer is filled with detergent and/or softener:
a - Do not pull out the machine
b - Do not relocate the machine
c - Do not tilt the machine sideways or backwards,
Before conducting these operations, the detergent drawer must always be removed from the machine.
If you wish to start the program while there is no detergent in the detergent drawer, liquid detergent dosage must be
cancelled and washing with powder detergent is required.
Only liquid detergent must be put inside the liquid detergent dosing tank and only softener must be put in the softener
dosing tank. Putting all kinds of liquid and powder chemicals together inside the tanks may damage your laundry or your
machine.
4.2.6.2 Dosage Selection, Cancellation or Use of Powder Detergent
•
Liquid detergent cannot be selected in some of the programs. Powder detergent must be used in these
cases. For more information, see Programme Table.
