32 / EN
Washing Machine / User Manual
The Bluetooth of your smart device should be on and your device should be connected to the internet during
setup. Your smart device should be close to the washing machine. After the setup, the Bluetooth can be
turned off or your smart device does not need to be close to the washing machine. You may use your product
provided that your smart device is connected to internet.
You may see the products paired with your account by touching the “Add/Remove Product” button on the
“Products” page in the app. You may perform the user pairing operation of these products on this page.
After the app is setup, with the Remote Control Function, your washing machine can give you instant status
notifications via your smart device.
C
Please visit www.homewhiz.com link to learn which Android and IOS versions are supported by HomeWhiz application.
Your washing machine will send you notifications over HomeWhiz application in the following
cases:
•
At the end of the programme,
•
When the door of the washing machine is opened,
•
In case of water cut warning,
•
In case of security warning,
C
In order to use the Remote Control function, the application should be set up on your smart device and your washing
machine should be connected to your home network. When your washing machine is not connected to the network, it
operates like a machine without HomeWhiz function.
Your product shall run with a connection to the wireless network in your home network. The controls made on the application
shall be provided over this network, so the wireless signal strength where the machine is located should be adequate.
Operates at HomeWhiz 2.4 GHz frequency band.
A
All safety measures described in the
“GENERAL SAFETY INSTRUCTIONS”
titled section of the user manual
are also valid for remote operation with Remote Control function.
Internet connection is required in order to use the Remote Control function. Otherwise, your app will not run on your smart
device. Contact your internet service provider if you have issues with your internet connection.
4.3.15.1 Remote Control Set Up
A connection should be set between your product and the app in order for the app to function.
A
Internet connection is required in order to use the Remote Control function. Otherwise, your app will not run on your smart
device. Contact your internet service provider if you have issues with your internet connection.
•
If you are adding a product for the first time, touch “Add/Delete Product” section on your app and touch
“Touch here to connect the product to the network”. Follow the steps in the app for the set up.
• To start the setup, make sure that your machine is turned off. Press
On/Off
switch and
Remote Control
button simultaneously for 3 seconds to turn your washing machine into Remote Control setup mode.
• An animation appears in the setup of the Remote Control and the wireless connection icon will blink until
your machinery connects to the internet. Only the On/Off button will be active in this mode. Other buttons will
not work.
•
Press “Add/Delete Product” button on the screen in the app and click on “Connect new product to the
network” opening on the screen.
