17 / EN
Washing Machine / User Manual
•
If powder detergent is to be used in programs where the detergent dosing system is operating, desired
amount of detergent is put into the powder detergent compartment. If the detergent compartment in the
middle is to be used, the automatic dosage selection must be deactivated.
•
Machine measures the load and determines the right amount of detergent depending on the load
amount and the selections made previously. The detergent taken is not visible while washing, it is taken
directly with water over the laundry.
•
If another liquid detergent with different properties than the one in the liquid detergent dosing tank
is preferred to be used, liquid detergent with said different properties should be put in the powder
detergent compartment in the middle and the liquid detergent dosage selection should be deactivated.
•
Softener will be taken from the dosing system.
Liquid detergent and softener dosing symbols become active or inactive according to the program selected
on the screen.
First position on the display means liquid detergent is active, softener is on.
If the liquid detergent and softener symbol is lit, it means that liquid detergent and softener
dosing is active.
If the liquid detergent and softener symbols are active on the screen;when you press the
Automatic Dosing key for the first time, the liquid detergent will turn on and the softener will
turn off.
If the softener symbol is not lit, it means that softener will not be used in the rinsing step.
When you press the Automatic Dosing key for the seconds time, the powder detergent and the
softener will turn on.
If the liquid detergent symbol is not lit, it means that it can be washed with powder detergent.
When you press the Automatic Dosing key for the third time, the powder detergent will turn
on and the softener will turn off. When you press it for the fourth time, it will return to the first
position.
4.2.6.3 Detergent and/or Softener Running Out
•
When the detergent or the softener put inside the detergent drawer finishes, the dosage symbol in the
display flashes. When this symbol flashes, it is necessary to add the decreasing detergent or softener to
the dosing tank. The product will be able to dose enough for 2-3 more cycles from the first moment the
symbol flashes.
4.2.6.4 Filling Detergent or Softener into the Wrong Compartment:
•
In case you fill the detergent or the softener in the wrong compartment, see 4.4.1 “Cleaning the
detergent drawer”.
