49
The Settings menu allows changing specific parameters of the selected operating mode. This
chapter explains how to change the specific parameters of the emptying time t
EZ
in months and
the number of lubrication strokes C per pump cycle PZ when the operating mode Empty time
mode is selected.
Procedure:
The LUB-V is switched on and there is no fault or error.
Remove the activation and programming key from the upper housing of the LUB-V and place it
on the action area.
Hold the activation and programming key on the action area. The double circle appears in the
bottom right corner. Leave the activation and programming key on the action area until
Settings
appears in the display. Remove the activation and programming key from the action area until
Settings appears in the display. The double circle disappears.
The confirmation hook appears; the display and the hook flash twice for visual confirmation.
Performing changes:
Summary of Contents for LUBRICUS LUB-V
Page 1: ...User manual LUB V 24 VDC...
Page 85: ......
