25
The Quick-Check-menu can only be accessed from the ON mode (LUB-V is switched on). The
Quick-Check-menu allows you to manually trigger a pump cycle on the LUB-V. For details see chap.
6.3.3.
The Settings-menu can only be accessed from the OFF mode (LUB-V is switched off).
The Settings-menu allows you to make changes to the operating mode and to set the size
of the cartridge used. For details, see Chapter 6.3.4. In addition, the Settings-menu all-
ows you to make changes to the settings within the different operating modes - and thus to
the dispensing behavior - of the LUB-V. For details, see Chap. 6.3.4.1, 6.3.4.2 or 6.3.4.3.
The Filling-menu can only be accessed from the ON mode (LUB-V is switched on). The LUB-V
thus carries out a pump cycle PZ with a total of 40 lubrication strokes C with the activation. The
detailed description of this can be found in Chap. 6.3.5.
For visual output, information on the various states of the LUB-V is shown on the display. The fol-
lowing table illustrates the indications on the display as well as the explanation of the respective
output:
Display
Description
Naming
The double circle in the lower right corner is
displayed when the action area is touched
with the activation and programming key
(activation and programming key detec-
ted).
Activation and pro-
gramming key detec-
ted by LUB-V
The confirmation hook in the lower right
corner is displayed when an entry has been
confirmed. In addition, the display flashes
twice.
Acceptance of chan-
ged value
In the ON and OFF state, the screen saver is
activated after 10 seconds. ON and OFF are
shown in reduced size on the display.
Screen saver
Summary of Contents for LUBRICUS LUB-V
Page 1: ...User manual LUB V 24 VDC...
Page 85: ......
