Gruetzner LUBRICUS LUB-V, User Manual

Page: 56 / 86

54
6.3.5 Activate the Filling-menu
The filling command enables you to trigger a defined multiple dispensing at the LUB-V. A pump
cycle PZ with a total of 40 lubrication strokes C is initiated with the activation. This function ena-
bles you to pre-fill connected accessories (tubes, distributors, etc.) with the lubricant contained
in the lubricant cartridge, especially during the initial commissioning of the LUB-V. The process
can be interrupted manually at any time.

The LUB-V is switched on and there is no fault or error.

Remove the activation and programming key from the upper housing of the LUB-V and place it
on the action area.

Hold the activation and programming key on the action area. The double circle appears in the
bottom right corner. Leave the activation and programming key on the action area until Filling
appears in the display. Remove the activation and programming key from the action area until
Filling appears in the display. The double circle disappears.

The confirmation hook appears; the display and the hook flash twice for visual confirmation.

If you do not want to cancel the process: Reattach the activation and programming key in the
opening provided for this purpose on the upper housing of the LUB-V.

The LUB-V delivers 40 strokes of lubricant.

If you want to cancel the operation: Move the activation and programming key to the action
area during the pump cycle PZ and wait until the STOP symbol appears in the display. Remove the
activation and programming key from the action surface as long as STOP is shown in the display.
The double circle disappears.