27
At the end of the operation or change of settings, insert the activation and programming key
again into the hole provided on the upper housing of the LUB-V. Then turn the activation and
programming key to the CLOSE position to restore the sealing effect.
Please note, however, that in the event of faults or changes to be made, no changes or actions
can be carried out on the LUB-V without the activation and programming key. If you do
not
reat-
tach the activation and programming key to the housing of the LUB-V after carrying out actions
on the LUB-V, there is no separation from the environment and dirt can get into the housing. The
activation and programming key must be remounted in the housing of the LUB-V after actions have
been performed.
WARNING
Dirt inside the LUB-V can lead to clogged lubricant lines, which can cause da-
mage to machinery or equipment.
(
When working on the LUB-V, always ensure that it is clean and that
the activation and programming key is mounted in the upper housing
of the LUB-V.
Summary of Contents for LUBRICUS LUB-V
Page 1: ...User manual LUB V 24 VDC...
Page 85: ......
