GROWSPAN
™
ROLLING PREMIUM HIGH TUNNELS
50
Revision date: 01.01.16
103937 ANCHOR STAKE AND STRAP LOCATIONS
24'-0" CENTER TO CENTER
24'-0" CENTER-TO-CENTER
111770
36'-0" CENTER TO CENTER
36'-0" CENTER-TO-CENTER
111771
48'-0" CENTER TO CENTER
48'-0" CENTER-TO-CENTER
111772
Install all 103937 stake and strap anchors on the inside of the frame. There are enough 103937 anchors to allow you
to move the entire frame and anchor the frame in the new location. Drive all stakes at an angle as shown on page 24.
Slide the AS2166 anchor shackle onto the stake before you drive the stake.
Then connect the strap to the anchor
shackle as shown. Use these diagrams to position the anchors in the correct locations
on both sides of the frame
.
To move the frame:
1. Fully open and secure all end panels and
roll-up side panels.
2. Loosen and
disconnect the straps from the
anchor shackles
–
do not
disconnect the
straps from the frame.
WARNING: DO NOT MOVE THE
BUILDING ON WINDY DAYS!
3. Remove end frame anchors and remove or
loosen end frame pipes as needed so these
can swing out of the way for the move.
4. Next, roll the frame on the 1.66" track to
the new location, drive new stakes, and
reconnect the straps to the anchor shackles.
