background image

Page 1

SELF-STANDING FAMILY TENT 

UNHCR Item No 00008154

Optimal Shipping / Container Information

Weight and Volume

Expected Life Span

Packing

The Self-Standing Family Tent has 18,5 m

2

 of main floor area.

It is the standard tent used by UNHCR and is suitable for a family of five people. 

It follows the recommended minimum living area for hot and temperate climates 

(3.5 m2 per person), and provides additional space for cold climates. 

Shelter specialists developed the tent’s technical specifications to guarantee a 

product fit for human use in all climates, with an appropriate outdoor life span, 

at a minimal cost. 

The  technical  specifications  for  this  tent  are  generic.  This  ensures  that  the 

product can be manufactured by different suppliers in various countries, with 

common technical know-how and standard equipment from the tent industry. 

UNHCR  purchases  family  tents  through  international  tender  processes  and 

establishes  frame  agreements  (long  term  agreements)  with  manufacturers 

that  have  completed  validation  /  qualification  of  Self-Standing  Family  Tent 

samples  in  one  of  the  UNHCR  approved  laboratories.  Self-Standing  Family 

tents are subject to random and continuous quality control throughout the frame 

agreement duration period. 

For  the  validation  /  qualification  of  Self-Standing  Family  Tent  samples,  it 

is  advisable  to  first  ensure  adherence  to  the  main  material  specifications. 

Information  about  approved  technical  laboratories  can  be  obtained  from  the 

UNHCR Supply Management Service in Budapest. 

Self-Standing Family tents should comply with all technical requirements, criteria 

and  parameters  described  in  this  document,  and  as  detailed  in  the  technical 

specifications section. 

Information for laboratory testing: 

To  complete  the  validation  /  qualification  of  the  Self-Standing  Family  Tent 

samples,  three  (03)  complete  samples  are  to  be  sent  to  one  of  the  UNHCR 

approved laboratories for testing and make up checking. One sample will be 

used for material testing and the remaining two for a rain test and a large scale 

fire test (if needed). A product is only acceptable if all criteria are passed on the 

same sample. 

Self-Standing  Family  Tents  are  designed  as  a  short-term  shelter  solution, 

particularly as a support during emergency situations, and is not a substitute 

for  more  permanent  shelters.  It  is  expected  that  family  tents  should  have  a 

minimum lifespan of one year, maintaining its shelter and waterproof capacities 

in all types of climates. 

Shelf life: the tent has a minimum shelf life of five years, under normal storage 

conditions, in dry, clean, and ventilated warehouses. It should be elevated from 

the ground (on pallets or pallet racks), not piled, not in containers or in tented 

warehouses. Packed tents are sensitive to rain and moisture. 

One  tent  with  all  accessories  are  packed  into  a  master  bag  that  ensures 

its’  protection  from  dirt  and  moisture. The  master  bag  is  made  from  woven 

polyethylene (PE) fabric of 190 g/m2 identical to that used for the main tent 

cover. 

The international standard warning sign ‘protect from water’ should be printed 

on the outside of the package. The buyer’s markings are printed on the 

outside in indelible ink.

The bag must be a PE bag with the dimensions 115 cm x 55 cm x 45 cm, with 

a zip closure. The bag must be secured with two webbing straps, each with a 

self-locking buckle that will not slide during transportation. Each strap provides 

two handles. The straps must not be sewn to the bag. All other aspects are as 

per standard packaging instructions. The palletised goods must not exceed the 

pallet length and width. 

Gross weight per unit:

 

approx.

 52 kg

Gross volume per unit:

 

approx. 

0.285 m

3

General Information and Description

Item Application Sample

With pallet

•   96 tents per 20’ GP

•   240 tents per 40’ DC

•   240 tents per 40’ HC 

Without pallet 

   

150 tents per 20’ GP

•   312 tents per 40’ DC

•   364 tents per 40’ HC

Summary of Contents for 00008154






















Reviews: