GROWSPAN
™
ROLLING PREMIUM HIGH TUNNELS
32
Revision date: 01.01.16
INSTALL THE AS2200 QUICK LINKS FOR THE ANTI-
BILLOW ROPES
The AS2200 Quick Links are used to secure the lower end
of the anti-billow rope when these are installed. Complete
the following steps to install the AS2200 Quick Links.
1. Roll-up the side panel so that the lower end of the
rafters are exposed. If it is windy, roll-up the side
panel so it is fully open to prevent damage and injury.
DO NOT ALLOW THE PANEL TO REMAIN LOOSE
DURING WINDY CONDITIONS.
YOU MUST SECURE
THE PANEL BEFORE YOU CONTINUE.
2. Take one AS2200 Quick Link, open the lock, and attach
it to the end rafter as shown. Consult the following
pages and review the diagram for your building for
quick link locations.
3. Repeat to install all remaining quick links for your
building.
Use the side profile diagrams on the following
page
to install the AS2200 quick links in the proper
locations along both sides of the assembled frame.
NOTE:
Be sure to choose the diagram for your building
when installing the quick links.
4. Continue with the installation of the 1/4" eyebolts used
to secure the top of the anti-billow ropes.
