> Simple installation
> Integrated with AC power supply function to realize the24h self-consumption monitoring
2.2 Qualification of skilled person
This grid-tied inverter system operates only when properly connected to the AC distribution net-
work. Before connecting the MOD TL3-XH to the power distribution grid, contact the local power
distribution grid company. This connection must be made only by qualified technical personnel to
connect, and only after receiving appropriate approvals, as required by the local authority having
jurisdiction.
2.3 Safety instructions
9. Please read this manual carefully before installation.If you fail to install according to the in-
structions in this manual,or ignore the warnings in the manual and the equipment is dam-
aged,our company reserves the right not to guarantee the quality;
1. AII operations and wiring should be finished by the professional electrical or mechanical engi-
neers;
2. During installation,except for the wiring terminals,please do not move other parts inside the
chassis;
3. AII electrical installations must comply with local electrical safety standards;
5.If the machine needs maintenance,please contact the local designated system installation and
maintenance personnel;
10. The use of this machine for grid-connected power generation requires permission
from the local power supply department;
11. When installing photovoltaic modules during the day,use opaque materials to cover the pho-
tovoltaic modules,otherwise the voltage at the module terminals will
2.3.1 Assembly Warnings
WARNING
>
Before installation, pleae check the unit to ensure that there is no trans-
portation or handling damage, which may affect the insulation integrity or
safety clearances; otherwise, it may cause safety hazards.
>
Follow the instructions in this manual to assemble the inverter. Note that
select the suitable mounting location and comply with the specified re-
quirements of cooling.
>
Unauthorized removal of necessary protections, improper use, incorrect
installation and operation may lead to serious safety and shock hazards
and/or equipment damage.
>
In order to minimize the possibility of shock hazards due to dan-
gerous voltages, cover the entire solar array with dark colored ma-
terials before connecting the array to any equipment.
5
Summary of Contents for MOD 10KTL3-XH
